--- title: "Serial console settings" slug: "serial-console-settings-7" tags: ["DLPNP 11.10.x", "Hardware"] updated: 2026-09-30T17:57:45Z published: 2026-09-30T17:57:45Z canonical: "docs.trellix.com/serial-console-settings-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Serial console settings You can use the serial console to install the appliance software only. ### Note By default, the serial console is turned off in Trellix DLP 8800 appliance. Contact the Technical Support to unlock the BIOS and then enable the serial console. The BIOS is password protected, by default. You must use another method, such as the RMM, to configure network settings and register the appliance with management platform. You can enable the RMM through the serial console. ### Note Installation progress does not appear when using the serial console. Serial connection parameters | Port setting | Value | | --- | --- | | Baud rate | 115200 | | Data bits | 8 | | Stop bits | 1 | | Parity | None | | Flow control | None | :