--- title: "System tree page — FRP system status" slug: "system-tree-page-frp-system-status-1" updated: 2026-10-29T12:20:00Z published: 2026-10-29T12:20:00Z canonical: "docs.trellix.com/system-tree-page-frp-system-status-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # System tree page — FRP system status Use this page to view the FIPS compliance status and module details for selected client systems in the System Tree. | Option / UI label | Possible Values | | --- | --- | | Overall FIPS Modules' Status | OK / Failed / Not Applicable | | TCC AES 32-bit Version | Trellix Core Cryptographic AES Module - 6.0.0 / Not reported | | TCC AES 32-bit Status | OK / Failed / Not reported | | TCC AES 64-bit Version | Trellix Core Cryptographic AES Module - 6.0.0 / Not reported | | TCC AES 64-bit Status | OK / Failed / Not reported | | WolfCrypt 32-bit Version | WolfCrypt v5.2.3 / Not reported | | WolfCrypt 32-bit Status | Normal / Degraded / Failed / Not reported | | WolfCrypt 64-bit Version | WolfCrypt v5.2.3 / Not reported | | WolfCrypt 64-bit Status | Normal / Degraded / Failed / Not reported | Values definitions: - **OK / Normal** — Normal mode of operation. - **Failed** — Integrity check or POST (Power-On Self-Test) failed. - **Degraded** — The system is running in reduced-capability mode. FIPS-approved algorithms still work, but non-approved fallbacks might be active. This is reported as **Failed** in the overall status. - **Not reported** — This module's status data was not found on the endpoint. - **Not Applicable** — The endpoint did not report any FIPS data. FIPS mode is disabled or the endpoint is running FRP prior to 5.7.x.