---
title: "Trellix DLP 8800 appliance rear panel and port assignments"
slug: "trellix-dlp-8800-appliance-rear-panel-and-port-assignments"
tags: ["DLPNP 11.10.x", "Hardware"]
updated: 2026-11-04T16:36:42Z
published: 2026-11-04T16:36:42Z
canonical: "docs.trellix.com/trellix-dlp-8800-appliance-rear-panel-and-port-assignments"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Trellix DLP 8800 appliance rear panel and port assignments

Familiarize yourself with the function and physical layout of the rear panel interfaces prior to setting up the Trellix DLP 8800 appliance.

**Trellix DLP** **8800 back panel**

![Trellix DLP 8800 back panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b2376474-ffab-64cf-16e9-7ffae838f285(3).png?sv=2026-02-06&spr=https&st=2026-11-11T15%3A59%3A12Z&se=2026-11-11T16%3A59%3A12Z&sr=c&sp=r&sig=5HTrQosQ99j0GDx8YvRlE5yQvz4CKCIcTtYlJo3wZEo%3D)

  
  

**Port assignments**

| Usage | Trellix DLP 8800 |
| --- | --- |
| **Common ports** |
| Serial console port — Use these connection settings: - **Baud rate** — 115200 - **Data bits** — 8 - **Stop bits** — 1 - **Parity** — None - **Flow control** — None | callout 4 > [!NOTE] > Note > > By default, the serial console is turned off. Contact the Technical Support to unlock the BIOS and then enable the serial console. The BIOS is password protected, by default. |
| VGA | callout 2 |
| USB — Use one of the USB ports to connect to the Trellix DLP Capture Storage Array console port using the provided USB-to-serial port adapter. | callout 3 |
| Remote Management Module (RMM) / Baseboard Management Controller (BMC) is used for setup and troubleshooting. | callout 8 |
| Power supplies | callout 1 |
| RAID port (available only when the RAID controller is installed) — Connects the RAID controller to Trellix DLP Capture Storage Array through the provided mini-SAS cable. | callout 9 |
| **Network port assignments** |
| OOB port — Out-of-band management traffic such as ePO - On-prem or ePO - SaaS management. | callout 5 |
| LAN 1 port — (10 GBase-T) - Data traffic for scanning - (Optional) Management traffic | callout 6/callout 10 Callout 10 is used as a LAN1 port when fiber SFP SR/LR NIC is used. Onboard LAN1 copper NIC must be removed to install SFP SR/LR NIC. |
| LAN 2 port — Not applicable to Trellix DLP Network Prevent appliance. It is used as capture port 1 in Trellix DLP Network Monitor appliance. | callout 7/callout 11 Callout 11 is used as Capture port 1 with Trellix Monitor Appliance when fiber SFP SR/LR NIC is used. |