--- title: "Trellix DLP Capture Storage Array Power Redundancy" slug: "trellix-dlp-capture-storage-array-power-redundancy-2" tags: ["DLPNP 11.10.x", "Hardware"] updated: 2026-09-30T17:57:45Z published: 2026-09-30T17:57:45Z canonical: "docs.trellix.com/trellix-dlp-capture-storage-array-power-redundancy-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Trellix DLP Capture Storage Array Power Redundancy Trellix DLP Capture Storage Array (DLP-CSA-B or DLP-CSA-A) hardware includes more than one power supply, which is configured to provide redundancy while operating at nominal power. Use two electrical outlets that are on different circuit breakers to achieve additional protection. If a power supply fails, a warning indicator light illuminates, contact Trellix for a replacement unit. ### Note Don't connect power to the Trellix DLP Capture Storage Array until the appliance is set up. If there is a power outage, the storage array automatically comes back up when power is restored. :