--- title: "Trellix DLP Network Prevent appliance does not accept email" slug: "trellix-dlp-network-prevent-appliance-does-not-accept-email-2" tags: ["Product Usage", "DLP 11.13.x"] updated: 2026-09-01T07:30:00Z published: 2026-09-01T07:30:00Z canonical: "docs.trellix.com/trellix-dlp-network-prevent-appliance-does-not-accept-email-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Trellix DLP Network Prevent appliance does not accept email If a Smart Host is not configured, Trellix DLP Network Prevent appliance can't accept email messages because it has nowhere to send them to. Trellix DLP Network Preventissues a 451 System problem: retry later. (No SmartHost has been configured) error, and closes the connection. > [!TIP] > Tip > > You can check whether Trellix DLP Network Prevent can accept email using telnet. If the appliance is correctly configured, you get a 220 welcome message: > > 220 host.domain.example PVA/SMTP Ready To resolve a connection issue, you must: 1. Install the necessary extensions in ePO - On-prem. 2. Register the appliance with a ePO - On-prem. Follow the steps in the Setup Wizard help. 3. Configure at least one DNS server in the **Common Appliance Management** policy. 4. Configure a Smart Host in the **Trellix DLP Network Prevent Email Settings** policy category. 5. Apply a Trellix Data Loss Prevention policy. See the policy assignment section in the Trellix ePolicy Orchestrator - On-premises Product Guide.