--- title: "Turn on the Trellix DLP Capture Storage Array" slug: "turn-on-the-trellix-dlp-capture-storage-array-2" tags: ["Hardware", "DLPNP 11.10.x"] updated: 2026-11-04T16:40:59Z published: 2026-11-04T16:40:59Z canonical: "docs.trellix.com/turn-on-the-trellix-dlp-capture-storage-array-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Turn on the Trellix DLP Capture Storage Array The Trellix DLP Capture Storage Array (DLP-CSA-B or DLP-CSA-A) has two redundant power supplies preinstalled and ships with two AC power cords specific to your country or region. > [!WARNING] > Caution > > The Trellix DLP Capture Storage Array turns on when the power is applied. Don't connect to the power supply until the appliance is set up. 1. Plug in one end of the AC power cord to the first power supply module in the back panel, then plug in the other end into the power source. 2. Plug in one end of the other AC power cord to the second power supply module in the back panel, then plug in the other end to the power source.