--- title: "Using DETech" slug: "using-detech" updated: 2026-09-12T18:55:55Z published: 2026-09-12T18:55:55Z canonical: "docs.trellix.com/using-detech" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Using DETech In general, the use of DETech is made up of these basic steps: 1. Start DETech. 2. Authenticate by using user credentials or a recovery XML file. 3. Set the boot disk (if required) to make sure that DETech authenticates the correct disk. 4. Authorize DETech, if the function you are about to perform requires it. 5. Perform the rescue operation. ### Note The DETech version must be the same or later than the Trellix Drive Encryption software that activated the system. Recovery of older 7.x Legacy BIOS clients will require the use of 7.x Legacy BIOS DETech. Drive Encryption 8.x or later does not supports Legacy BIOS. :