--- title: "Add and configure an iSCSI device" slug: "add-and-configure-an-iscsi-device-1" tags: ["ESM"] updated: 2026-09-12T21:25:00Z published: 2026-09-12T21:25:00Z canonical: "docs.trellix.com/add-and-configure-an-iscsi-device-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Add and configure an iSCSI device Add an external iSCSI device to increase data storage capacity. 1. On the system navigation tree, select the ELM, then click the **Properties** icon. ![GUID-F191D568-8B93-4D2C-9BFC-F1342FC407BD-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb4d6f9c-e211-da56-47b1-210d2bde160b(10).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A30%3A24Z&se=2026-11-22T14%3A30%3A24Z&sr=c&sp=r&sig=9Ow0PgdNyQCcqxwr5VnfWssK6gKY0fJn%2Bya2AdkeMmY%3D) 2. Click **Data Storage**. 3. On the **iSCSI** tab, click **Add**. 4. Enter the information requested, then click **OK**. If the connection is successful, the system adds the device and its IQNs to the **iSCSI Configuration** list and **Device Type** list on **Add Storage Device** . ### Note Once an IQN begins storing ELM logs, you can't delete the iSCSI target. Due to this limitation, set up your iSCSI target with sufficient space for ELM storage. 5. Before using an IQN for ELM storage, select it on the list, then click **Format**. 6. To check its status as it is formatting, click **Check Status**. 7. To discover or rediscover the IQNs, click the iSCSI device, then click **Discover.** ### Important Attempts to assign more than one device to an IQN can result in data loss. :