--- title: "Adding a Server to the Server Address List Using the Web UI" slug: "adding-a-server-to-the-server-address-list-using-the-web-ui" updated: 2026-09-08T19:06:27Z published: 2026-09-08T19:06:27Z canonical: "docs.trellix.com/adding-a-server-to-the-server-address-list-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding a Server to the Server Address List Using the Web UI To add a server to the server address list:![server_address.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ff666e48-d2bd-ad8a-df61-b33728dec328(1).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A24%3A35Z&se=2026-11-22T14%3A24%3A35Z&sr=c&sp=r&sig=z%2BG5ewupQQO4ZrDuH4%2B8PwJJhO1e3iDd8QO2G159fcA%3D) (Optional) If the endpoints in your environment have agent software version 20 or later installed, select **Enable Provisioning** if the added server will be doing provisioning. At least one server must be designated as a provisioning server. (Optional) If the endpoints in your environment have agent software versions earlier than version 20 installed, select **Set as primary** if the added sever will be doing provisioning. This specifies the server as the primary server for your network. Primary server are used to provision agents older than version 20. Only a single server can be designated as a primary server. 1. Log in to the Web UI as an administrator. 2. From the **Admin** menu, select **Policies** to access the **Policies** page. 3. From the Policies table, select the **Agent Default Policy** to access the **Edit Policy** page. 4. Select the **Server Addresses** tab. 5. In the **Enter server address of server(s)**field, enter the hostname or the IP address of the Endpoint Security (HX) or DMZ server and click **Add**. 6. Click **Save**. :