--- title: "Allow certificate authentication on a client system" slug: "allow-certificate-authentication-on-a-client-system-1" tags: ["Product Usage", "ENS 26.x", "Endpoint Security"] updated: 2026-09-14T19:35:16Z published: 2026-09-14T19:35:16Z canonical: "docs.trellix.com/allow-certificate-authentication-on-a-client-system-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Allow certificate authentication on a client system Certificates allow a vender to run code within Trellix processes. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. From the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f(1).png?sv=2026-02-06&spr=https&st=2026-11-22T18%3A28%3A46Z&se=2026-11-22T19%3A28%3A46Z&sr=c&sp=r&sig=%2BocNI7N8gq5l1vIyD6AbPh%2FcdX7lSE9ImLfykUtoaTM%3D), select **Settings**. 3. Click **Show Advanced**. 4. In the **Certificates** section, select **Allow**. > [!WARNING] > Caution > > This setting might result in compatibility issues and reduced security. 5. Click **Apply**. The certificate information appears in the table.