--- title: "Assign ePO - On-prem tags to events and IP addresses" slug: "assign-epo-on-prem-tags-to-events-and-ip-addresses" tags: ["ESM", "Product Usage"] updated: 2026-09-12T21:19:39Z published: 2026-09-12T21:19:39Z canonical: "docs.trellix.com/assign-epo-on-prem-tags-to-events-and-ip-addresses" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Assign ePO - On-prem tags to events and IP addresses Assign ePO - On-prem tags to events generated by alarms and views if alarms have ePO - On-prem tags. You can also apply tags to IP addresses. 1. On the Trellix ESM dashboard, select events with the local network's IP address as "Source IP" or "Destination IP" form **Events** tab. 2. On the **Events** tab, click ![GUID-90CC508D-C258-41AB-9D9C-4E1D7DE5FBCB-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-effb7164-c5e4-9033-e732-747e1488f002(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A14%3A42Z&se=2026-11-22T15%3A14%3A42Z&sr=c&sp=r&sig=KfFnO1D7J07bfmbUMRrsaccOMWh3PxvaCYsvymp9orM%3D) → Actions → ePO Tagging. 3. On the **ePO Tagging** page, select a ePO - On-prem device from the drop-down list. 1. Enter a host name or IP address (supports comma-delimited list). 2. Select **Wake up client** to apply the tags immediately. 3. Click **Assign** to apply the selected tags to the IP address. 4. Wait until the panel finishes loading then click **Cancel** to close the page.