--- title: "Block lists" slug: "block-lists" tags: ["ESM", "Product Usage"] updated: 2026-09-11T12:11:33Z published: 2026-09-12T21:19:46Z canonical: "docs.trellix.com/block-lists" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Block lists A *block list* blocks traffic as it flows through a network device before the deep packet inspection engine analyzes it. A *global block list* applies to all network devices managed by Trellix ESM. You can set up a block list for individual network devices on Trellix ESM. A global block list only allows permanent block list entries. To set up temporary entries, use the network device **Block List** option. Each network device can use the global block list. The feature is disabled on all devices until you enable it. The **Global Block List Editor** allows you to: - Configure blocked source and destination entries to block on all ports, or a specific port. - Configure entries with a masked range of IP addresses with the port set to any (0) and the duration must be permanent. - After typing an IP address or host name, the button next to that control says either **Resolve** or **Lookup** based on the value entered. If it says **Resolve**, clicking it resolves the entered host name, populates the **IP Address** field with that information, and moves the host name to the **Description** field. Otherwise, clicking **Lookup** performs a lookup on the IP address and populates the **Description** field with the results of that lookup. > ### Tip > > Some websites use more than one IP address, or have IP addresses that are not always the same. Don't rely on this tool to make sure blocking of websites.