--- title: "Change Password on the HA receiver" slug: "change-password-on-the-ha-receiver" tags: ["ESM"] updated: 2026-09-12T21:25:18Z published: 2026-09-12T21:25:18Z canonical: "docs.trellix.com/change-password-on-the-ha-receiver" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Change Password on the HA receiver The IPMI interface connection is configurable through the HA receiver command line interface. After you configure the IPMI interface connection on the HA receiver, change the password for the configured IPMI connection on the command-line interface of the HA receiver, through the below commands in a sequence. 1. In the command-line interface, enter **`ipmitool user list n`** (where n is 1 or 3). 2. Enter the **`ipmitool user set password <user id> <password>`**. In the command-line syntax, for **`user id`** enter the user name and for **`password`** enter the password respectively. 3. To retrieve the user ID, use the user list command: **`<ERC name> ~ # ipmitool user list 3`**. **Example** : For a **ERC-2650** device, in the command-line interface, enter the following command to get the list of available users on the console: **` ERCHA2-ERC-2650 ~ # ipmitool user list 3`** | ID | Name | Callin | Link Auth | IPMI Msg | Channel Priv Limit | | --- | --- | --- | --- | --- | --- | | 1 | | false | false | true | ADMINISTRATOR | | 2 | root | false | true | true | ADMINISTRATOR | | 3 | test1 | false | true | true | ADMINISTRATOR | | 4 | test2 | false | true | true | ADMINISTRATOR | | 5 | test3 | false | true | true | ADMINISTRATOR | :