--- title: "Change the aging period for failed acquisitions using the CLI" slug: "change-the-aging-period-for-failed-acquisitions-using-the-cli-1" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:17Z published: 2026-09-10T15:35:17Z canonical: "docs.trellix.com/change-the-aging-period-for-failed-acquisitions-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Change the aging period for failed acquisitions using the CLI To change the aging period for failed acquisitions using the CLI: 1. Enable CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the number of seconds for the aging period of failed acquisitions: ``` hostname (config) # hx server acquisition aging failed-period ``` The default is 0 seconds (disabled). Valid values range from 0 through 31536000 seconds (one year). To restore the default aging period for failed acquisitions: ``` hostname (config) # no hx server acquisition aging failed-period ``` 3. Save your settings. ``` hostname (config) # write mem ``` :