--- title: "Change the aging period for pending acquisitions using the CLI" slug: "change-the-aging-period-for-pending-acquisitions-using-the-cli" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:16Z published: 2026-08-26T19:31:16Z canonical: "docs.trellix.com/change-the-aging-period-for-pending-acquisitions-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Change the aging period for pending acquisitions using the CLI A pending acquisition request is an acquisition that is waiting to be processed because an acquisition task is not yet available. For information on setting the pending acquisition task limit, see [Setting pending acquisition task limits](/v1/docs/change-the-maximum-number-of-pending-acquisition-tasks-using-the-cli). **To change the aging period for pending acquisitions using the CLI:** 1. Enable CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Specify the number of seconds for the aging period of pending acquisitions: ``` hostname (config) # hx server acquisition aging pending-period ``` The default period for aging pending acquisition requests is **1209600** seconds (or 14 days). The range is 0-31536000 seconds (one year). Setting the limit at 0 disables the deletion of pending acquisition requests. To restore the default aging period for pending acquisitions: ``` hostname (config) # no hx server acquisition aging pending-period ``` 3. Save your settings. ``` hostname (config) # write mem ```