--- title: "Change the maximum number of pending acquisition tasks using the CLI" slug: "change-the-maximum-number-of-pending-acquisition-tasks-using-the-cli-2" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:17Z published: 2026-09-10T15:35:17Z canonical: "docs.trellix.com/change-the-maximum-number-of-pending-acquisition-tasks-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Change the maximum number of pending acquisition tasks using the CLI The Endpoint Security (HX) appliance limits the number of acquisition tasks available to service acquisition requests. If more requests are made than the configured maximum, they are put on hold (pending). When an acquisition task completes, Endpoint Security (HX) creates new tasks (up to the configured maximum) until all the requests on hold are serviced. You can configure the maximum number of pending tasks for the appliance using the `hx server triage task-limit` CLI command. Pending tasks will be automatically deleted if they exceed the aging limit set for pending acquisitions. To control this setting, see [Specifying the pending acquisition aging period using the CLI](/docs/change-the-aging-period-for-pending-acquisitions-using-the-cli-1) . The Endpoint Security (HX) appliance automatically deletes acquisitions if an Administrator, Analyst, or Investigator uses the Endpoint Security (HX) Web UI to manually delete the associated agent. Prerequisites - Admin access To change the maximum number of pending acquisition tasks using the CLI: 1. Enable CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Change the maximum number of pending acquisition tasks: ``` hostname (config) # hx server triage task-limit number ``` The default maximum number of pending acquisition tasks is **100**. The range for this setting is 0-65535. Setting the maximum to 0 disables the limit. To restore the default maximum number of pending acquisition tasks: ``` hostname (config) # no hx server triage task-limit ``` 3. Save your settings. ``` hostname (config) # write mem ``` :