--- title: "Check device status" slug: "check-device-status" tags: ["ESM", "Product Usage"] updated: 2026-09-12T21:19:32Z published: 2026-09-12T21:19:32Z canonical: "docs.trellix.com/check-device-status" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Check device status Device status alerts (active flags) indicate issues reported by health monitors. Each Trellix SIEM device includes a health monitor. When a device is not healthy, a red flag, a yellow flag, or a red x appears on the device tree next to the device. - Red flag - device is not functioning properly - Yellow flag - the device is functioning, but has issues - Red x (data sources only) - the data source is disabled You can click a flag to see more detailed information. 1. To see a list of issues for a Data Streaming Bus, right-click the device on the Data Streaming Bus Configuration page (**System Properties** **→** **Data Streaming Bus**) and select **View Health Monitor Data**. 2. To see a list of issues for other devices, click the red or yellow flag next to the device on the device tree. | A flag on this type of node... | Opens... | | --- | --- | | System or group | The **Device Status Alerts Summary** page, which is a summary of the status alerts for the devices associated with the system or group. It can display these status alerts: - **Drive Space** — A hard drive is full or running low on space. Could include the hard drive on the Trellix ESM, redundant Trellix ESM, or remote mount point. - **Critical** — The device is not working properly. - **Warning** — Something on the device is not functioning properly. - **Informational** — The device is working properly but the device status level changed. - **Out of Sync** — The virtual device, data source, or database server settings on the Trellix ESM are out of sync with what is actually on the device. - **Rolled over** — The log table for this device ran out of space so it has rolled over. This means that the new logs are writing over the old logs. - **Inactive** — The device has not generated events or flows in the inactivity threshold time period. - **Unknown** — Trellix ESM could not connect to the device. **Drive space**, **Rolled over**, and **Informational** flags can be resolved by checking the boxes next to the flags and clicking **Clear Selected** or **Clear All**. | | Device | The **Device Status Alerts** page, which has buttons that take you to locations for resolving the problem. It might include these buttons: - **Log** — The **System Log** (for Local Trellix ESM) or **Device Log** page shows a summary of all actions that have taken place on the system or device. - **Virtual Devices**, **Data Sources**, **VA Sources**, or **Database Servers** — Lists the devices of this type on the system, allowing you to check for problems. - **Inactive** — The **Inactivity Threshold** page shows the threshold setting for all devices. This flag indicates that the device has not generated an event in the interval specified. | :