--- title: "Check upgrade compatibility manually before upgrading from version 10.x" slug: "check-upgrade-compatibility-manually-before-upgrading-from-version-10-x-1" tags: ["ESM"] updated: 2026-09-12T21:25:04Z published: 2026-09-12T21:25:04Z canonical: "docs.trellix.com/check-upgrade-compatibility-manually-before-upgrading-from-version-10-x-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Check upgrade compatibility manually before upgrading from version 10.x Identify and fix any obstacles to a clean upgrade. Use these instructions if you are upgrading from one of these Trellix ESM versions: - 10.1.x through 10.3.x - 11.0.x and 11.1.x If you are upgrading from version 10.0.x or earlier, contact Support. If you are upgrading from 10.4.x or 11.2.x and later, pre-upgrade checks happen automatically during the upgrade process. These factors affect the success of the upgrade: | Disk space | Each device should have 55-Gb total disk space. ELM, ELMREC, and ENMELM require 150GB free space each. VMs for all devices need at least 500 GB of disk space. | | --- | --- | | Health Flags | Yellow flags typically indicate inactivity, but might indicate alarms that need to be synced or a pending Write action. Red flags indicate more serious conditions and usually lead you to the System log. Best practice is to be "flag free" so serious issues aren't obscured by a datasource inactivity. | | Connectivity | Verify the connectivity to each of the keyed devices. | | Ports | Note the ports, source/target, IP, and protocols that need to be allowed by firewall rules. | | Processes | Perform a status check from the GUI for each device to make sure that key processes in the system are running. | 1. Verify that your system meets the minimum system requirements. See System Requirements and the[Knowledge Base article](https://kcm.trellix.com/corporate/index?page=content&id=KB82516). 2. Verify that your hardware is Generation 4 or later. 3. Decide on a cluster mode. See Trellix ESM Clusters. 4. Select the Device Status view and check available disk space on each device. | ![GUID-58ED4D90-1A6A-4AC3-9B53-9074F7F69C2E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-121c8b76-c7ae-baba-b60d-62ebb6d90298(7).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A24%3A39Z&se=2026-11-22T16%3A24%3A39Z&sr=c&sp=r&sig=tXzkeAcFzIa0geXGYT%2BEg8kW6yL1jXVLEvMetZeQ%2BuE%3D) | | --- | 5. Check the health status (red or yellow flags) of each device and resolve the issues. 6. Check network connectivity to each device ( Properties → Connection → Status). 7. Check the status of the processes running on each device ( Properties → Information → Refresh. | ![GUID-CEC2F0C7-E787-46CB-B83C-14C0E2B760B1-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-4b30e118-fede-3f66-04cd-9665942d30b7(7).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A24%3A39Z&se=2026-11-22T16%3A24%3A39Z&sr=c&sp=r&sig=tXzkeAcFzIa0geXGYT%2BEg8kW6yL1jXVLEvMetZeQ%2BuE%3D) | | --- | :