--- title: "Configure a Firewall Options policy" slug: "configure-a-firewall-options-policy-5" tags: ["Product Usage", "Endpoint Security (ENS)", "ENS 10.7.x", "ENS-TP 10.7.x"] updated: 2026-10-07T18:10:20Z published: 2026-10-07T18:10:20Z canonical: "docs.trellix.com/configure-a-firewall-options-policy-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure a Firewall Options policy Configure the Firewall Options policy and enforce it to managed Mac. You can define these settings in the Firewall Options policy. - Enable or disable Firewall protection on managed Mac. - Enable or disable Adaptive mode on managed Mac. - Retain existing client rules when enforce Firewall policy. - Define maximum time limit for TCP, UDP, and ICMP connections time out. - Define networks 1. Log on to the ePO - On-prem server as an administrator. 2. From the **Policy Catalog**, select **Endpoint Security Firewall** as the product, then select **Options** as the category. 3. Click **New Policy**, type a name for the policy, then click **OK**. 4. On the **Policy Catalog** page, click the policy that you created, then define these settings. | In... | Configure... | | --- | --- | | **Firewall** | **Enable Firewall** — Enables or disables Firewall protection on managed Mac. | | **Tuning Options** | - **Enable Adaptive mode (create rules on the clients automatically** — Enables Adaptive mode on managed Mac. - **Retain existing user added rules and Adaptive mode rules when this policy is enforced** — Retains rules created locally on the managed Mac and the Adaptive mode rules. | | **Stateful Firewall** | - **No. of seconds (1 -240) before TCP connections time out** - **No. of seconds (1 -240) before UDP and ICMP echo virtual connections time out** > [!NOTE] > Note > > The default value is 30 seconds. - **Use FTP Protocol Inspection** — Creates dynamic rules for FTP data connections by actively monitoring the FTP commands on the control channel. | | **DNS Blocking** | **Domain Name** — Specify domain names. For more information, see Configure DNS Blocking. | | **Defined Networks** | In **Add Defined Networks** - **Single IP** - **Subnet** - **Local Subnet** - **Range** - **Fully qualified domain name** - **Any local IP address** - **Any IPV4 Address** Select the option from the **Trusted** drop-down list. - **Yes** — The network is trusted automatically. - **No** — The network is not trusted automatically. The network is allowed or blocked according to the rule settings. | 5. Click **Save**.