--- title: "Configure a Trellix Enterprise Security Manager - Enterprise Log Manager device" slug: "configure-a-trellix-enterprise-security-manager-enterprise-log-manager-device-1" tags: ["ESM"] updated: 2026-09-12T21:25:00Z published: 2026-09-12T21:25:00Z canonical: "docs.trellix.com/configure-a-trellix-enterprise-security-manager-enterprise-log-manager-device-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure a Trellix Enterprise Security Manager - Enterprise Log Manager device Set up your Trellix Enterprise Security Manager - Enterprise Log Manager to compress data and to store multiple copies of data. - Your system must include a standalone Trellix ESM - ELM. - Configure a standby Trellix ESM - ELM but don't add it to the console. - Make sure that there is no data on the standby Trellix ESM - ELM. 1. Set Trellix ESM - ELM compression. 1. On the system navigation tree, select the ELM, then click the properties icon. ![GUID-F191D568-8B93-4D2C-9BFC-F1342FC407BD-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb4d6f9c-e211-da56-47b1-210d2bde160b(10).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A41%3A09Z&se=2026-11-22T16%3A41%3A09Z&sr=c&sp=r&sig=aGhx0BzIETbymy2KaVF3HqONhyS3XCpi74khCTsNtBY%3D) 2. Click ELM Configuration → Compression. 3. Select the ELM compression level, then click **OK**. 2. Set up ELM redundancy. 1. On the **ELM Properties** page, click **ELM Redundancy**, then click **Enable**. 2. Type the IP address and password for the standby ELM, then click **OK**. 3. On the **ELM Properties** page, click **Storage Pools**, and verify that the **Active** tab is selected. 4. Add storage devices to the active ELM. 5. Click the **Standby** tab, then add storage devices that have enough combined space to match the storage on the active ELM. 6. Add one or more storage pools to each ELM. 7. To switch the standby ELM to primary, click **Switch ELMs**. Logging and configuration actions are locked during the switch-over process. 8. For troubleshooting, you can stop a standby ELM by clicking **Suspend** and start it by clicking **Return to Service**. :