--- title: "Configure application-specific Firewall rule" slug: "configure-application-specific-firewall-rule-10" tags: ["Product Usage", "Endpoint Security (ENS)", "ENS 10.7.x", "ENS-TP 10.7.x"] updated: 2026-10-07T17:59:38Z published: 2026-10-07T17:59:38Z canonical: "docs.trellix.com/configure-application-specific-firewall-rule-10" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure application-specific Firewall rule Create firewall rules to handle the network traffic according to your requirements. 1. Click the Trellix menulet ![GUID-9BE2692D-7F54-44CB-AE3B-3D141955024E-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-98c789c6-8a88-6a4d-6820-20224b56ed0a(20).png?sv=2026-02-06&spr=https&st=2026-11-18T09%3A03%3A17Z&se=2026-11-18T10%3A03%3A17Z&sr=b&sp=r&sig=R8A32mq8y5wIrty1z1QDOkyiqW5zd01tn2qyNChx4R0%3D) on the status bar, then select **Preferences**. 2. Select **Firewall**. 3. Click ![GUID-8CC2C84C-B44D-4B10-A920-D4E503DB9CC1-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-63a0a10e-f9de-98fd-8841-5e69a46827ab(15).png?sv=2026-02-06&spr=https&st=2026-11-18T09%3A03%3A17Z&se=2026-11-18T10%3A03%3A17Z&sr=b&sp=r&sig=B6%2BRm5guPbFskshz3M8gUUMUa1te0OUBWcO2Um6d7EA%3D), type the administrator password, then click **OK**. 4. On the Firewall rule page, click + in the bottom left corner of the console to open the rule page. 5. Click ![GUID-213AEF71-3D9B-4242-AB47-3B513C7B845E-low.gif](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0cce8f86-7288-e4ca-a212-8f93a601b75f(11).gif?sv=2026-02-06&spr=https&st=2026-11-18T09%3A03%3A17Z&se=2026-11-18T10%3A03%3A17Z&sr=b&sp=r&sig=xwVyKgGvu59hW87XVQ%2FNJ2mBLQihv8rONtVm9G7w09k%3D) in the bottom left corner of the console to add a rule. 6. Configure the following parameters as needed: | For this field... | Configure these options... | | --- | --- | | **Rule Name** | Type a name for the rule. | | **Status** | - **Enabled** — To enable the firewall rule. - **Disabled** — To disable the firewall rule. > [!NOTE] > Note > > The rules appear as grayed out in the rules list, when their status is set to **Disabled**. | | **Action** | - **Block** — To block the network traffic. - **Allow** — To allow the network traffic. | | **Direction** | - **Incoming** — To apply the rules for incoming network traffic. - **Outgoing** — To apply the rules for outgoing network traffic. | | **Logging** | - **Enabled** — To make an entry in the system log, when a network packet matches a rule. - **Disabled** — To avoid making an entry in the system log when the network packet matches a rule. > [!WARNING] > Caution > > Enabling the logging feature can impact the system performance. We recommend that you enable Logging only for troubleshooting and learning purpose. | | **Interface(s)** | - **Wired** - **Wireless** - **Virtual** | | **Network Protocol IPv4** | Define the configuration for **Local** Mac using: - **Single** - **Subnet** - **Local Subnet** - **Range** (of IP addresses) - **Fully Qualified Domain Name** - **Any local IP Address** - **Any IPv4 Address** > [!TIP] > Tip > > Local system is the system on which you are adding rules. Select the configuration for **Remote** system using: - **Single** - **Subnet** - **Local Subnet** - **Range** (of IP addresses) - **Fully Qualified Domain Name** - **Any local IP Address** - **Any IPv4 Address** > [!TIP] > Tip > > Remote system is the system you want to connect. > [!NOTE] > Note > > Use to add more criteria and to remove existing criteria. | | **Transport Protocol** | Select **All Protocols** to apply the rule for all protocols. For **Select Protocol**, define the parameters for: - **TCP** - **UDP** - **ICMP** > [!NOTE] > Note > > Use to add more criteria and to remove existing criteria. | > [!TIP] > Tip > > Add specific rules at the top of the list, and generic rules at the bottom to filter the traffic most efficiently. 7. In **Applications**, click **Browse**, select the application from the Applications directory, then click **Open**. > [!NOTE] > Note > > When you select a bundle, the product enumerates through the bundle and lists all Mach-O binaries, that are part of the bundle, in the rule. Wildcards are not supported in the application path and name. 8. Move the rule to the top of the rules list. 9. Click to prevent further changes.