--- title: "Configure Cisco Wireless LAN Controller" slug: "configure-cisco-wireless-lan-controller" tags: ["ESM", "Reference"] updated: 2026-10-27T15:50:12Z published: 2026-10-27T15:50:12Z canonical: "docs.trellix.com/configure-cisco-wireless-lan-controller" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Cisco Wireless LAN Controller 1. In the controller UI, select **Management** | **Logs** | **Config**, enter the IP address of the server where you want to send the syslog messages, then click **Add**. 2. In the **Syslog Level** field, select the severity level. ### Note The only messages sent to the syslog server are messages with severity equal to or less than the level you set. 3. In the **Syslog Facility** field, set the facility for outgoing syslog messages to the syslog servers. 4. By default, messages logs include information about the source file. To not include this information, deselect **File Info**. 5. To commit and save the changes, click **Apply**, then click **Save Configuration**. :