--- title: "Configure CLI breach notifications" slug: "configure-cli-breach-notifications-4" tags: ["Product Usage", "ACC 8.4.x"] updated: 2026-09-01T13:05:00Z published: 2026-09-01T13:05:00Z canonical: "docs.trellix.com/configure-cli-breach-notifications-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure CLI breach notifications Administrators need to be aware of any attempt to recover the CLI with an incorrect password. In case any attempt is made to breach security, the CLI needs to be disabled immediately to thwart the attempt. You can configure Application Control and Change Control products to notify the administrator of any unsuccessful attempts to recover the CLI on the endpoint. > [!NOTE] > Note > > This feature is available only in ePO - On-prem-managed configuration and unavailable in standalone configuration. 1. On the ePO - On-prem console, select **Menu** → **Policy** → **Policy Catalog**. 2. Select **Solidcore 8.x.x: General** for the product. 3. In the **Configuration (Client)** category, click **Duplicate** for the **Trellix Default** policy. 4. Specify the policy name, then click **OK**. 5. Open the policy and click the **CLI** tab. 6. Enable the feature by clicking **Enable**. By default, this feature is disabled. 7. Specify the number of failed attempts and the interval after which to disable the CLI in case of a security breach. By default, the CLI is disabled if a user makes three unsuccessful attempts in 30 minutes. 8. Specify how long to disable the CLI if any user makes unsuccessful logon attempts. By default the CLI is disabled for 30 minutes. 9. Click **Save**. 10. Apply the policy to the endpoints. After you enable the feature: - Each attempt to recover the CLI with the correct password generates the **Recovered Local CLI** event. - Any attempt to recover the CLI with an incorrect password generates the **Unable to Recover Local CLI** event. When the user exceeds the permitted number of failed attempts (as defined in the policy), the CLI recovery is disabled to prevent the breach attempt. The **Disabled Local CLI Access** event is generated. This is priority event and is sent immediately to the ePO - On-prem console.