--- title: "Configure Direct Attached Storage (DAS)" slug: "configure-direct-attached-storage-das-3" tags: ["ESM"] updated: 2026-09-12T21:25:00Z published: 2026-09-12T21:25:00Z canonical: "docs.trellix.com/configure-direct-attached-storage-das-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Direct Attached Storage (DAS) Set up a DAS to increase data storage capacity. 1. On the system navigation tree, select the Trellix ESM device, then click **Properties**. ![GUID-F191D568-8B93-4D2C-9BFC-F1342FC407BD-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb4d6f9c-e211-da56-47b1-210d2bde160b(10).png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A10%3A25Z&se=2026-11-22T14%3A10%3A25Z&sr=c&sp=r&sig=LCR395IoJi6n2e5BU5xYGB4N%2Fgiz6PxfFbOJVfYdzOY%3D) 2. Click Database → Data Storage. 3. In the table, click one of the devices that has not been assigned to store Trellix ESM data. 4. Click **Assign** and click **Yes**. ### Important Once you assign a device, you can't change it. :