--- title: "Configure Exploit Prevention settings to block threats on a client system" slug: "configure-exploit-prevention-settings-to-block-threats-on-a-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-08-28T20:17:58Z published: 2026-09-14T20:28:37Z canonical: "docs.trellix.com/configure-exploit-prevention-settings-to-block-threats-on-a-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Exploit Prevention settings to block threats on a client system To prevent applications from executing arbitrary code on the client system, you can configure the Exploit Prevention exclusions, default signatures, and application protection rules. > [!NOTE] > Note > > Exploit Prevention is not supported in the ARM architecture. ### Before you begin Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. You can set the action for Trellix -defined signatures. You can enable, disable, delete, and change the inclusion status of Trellix-defined application protection rules. You can also create and duplicate your own application protection rules. Any changes you make to these rules persist through content updates. For the list of processes protected by Exploit Prevention, see [KB58007](https://thrive.trellix.com/s/article/KB58007). ### Task 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Threat Prevention** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-21T05%3A29%3A28Z&se=2026-11-21T06%3A29%3A28Z&sr=c&sp=r&sig=zrFsxQclilyiecHB65BBGUJProS6BVt4WU7XnUS2n%2F8%3D), select **Settings**, then click **Threat Prevention** on the **Settings** page. 3. Click **Show Advanced**. 4. Click **Exploit Prevention**. 5. Configure settings on the page, then click **Apply**.