--- title: "Configure Fortinet FortiGate UTM through the Management Console" slug: "configure-fortinet-fortigate-utm-through-the-management-console" tags: ["ESM", "Reference"] updated: 2026-10-27T15:50:12Z published: 2026-10-27T15:50:12Z canonical: "docs.trellix.com/configure-fortinet-fortigate-utm-through-the-management-console" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Fortinet FortiGate UTM through the Management Console ### Note The preferred format is space-delimited logs, but you can also use comma-separated logs. 1. Go to **Log&Report** | **Log Config** | **Log Setting**, then select **Syslog**. 2. Expand the **Options** section to set any custom logging options, then enter this information in the corresponding fields: - **Name/IP** — Enter the host name or IP address of the Trellix Event Receiver. - **Port** — Set the port to 514. - **Level** — Set the level of logging. - **Facility** — Leave the default value. - **Enable CSV** — Leave this box deselected. 3. Click **Apply**. :