Go to Log and Report | Log Settings | Remote Log Settings.
The Remote Log Settings tab is displayed.
Table 5-7 Option definitions
Option
Definition
Enabled
Select to enable remote storage on the server.
ID
Displays the remote host ID.
Server
Displays the IP address of the syslog server.
Port
Displays the port on the syslog server.
Level
Displays the minimum severity level for logging.
Facility
Displays the facility identifier that the FortiMail unit uses to identify itself.
Select Enabled to allow logging to a remote host, then, in Profile name, enter a profile name.
In IP, enter the IP address of the syslog server where FortiMail stores the logs.
In Port, enter 514 for syslog (default is UDP).
In Level, select the severity level that a log message must equal or exceed to be recorded to this location.
In Facility, select the facility identifier that the FortiMail unit uses to identify itself when sending log messages.
To easily identify log messages from the FortiMail unit, enter a unique facility identifier, then verify that no other network devices use the same facility identifier.
Deselect CSV format.
In Logging Policy Configuration, enable the types of logs that you want to record to this storage location, then click Create.
Configure Fortinet FortiMail
- Published on Oct 27, 2026
- 1 minute(s) read
Was this article helpful?