--- title: "Configure Fortinet FortiMail" slug: "configure-fortinet-fortimail" tags: ["ESM", "Reference"] updated: 2026-10-27T15:50:12Z published: 2026-10-27T15:50:12Z canonical: "docs.trellix.com/configure-fortinet-fortimail" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Fortinet FortiMail 1. Go to **Log and Report** | **Log Settings** | **Remote Log Settings**. The **Remote Log Settings** tab is displayed. Table 5-7 Option definitions | Option | Definition | | --- | --- | | Enabled | Select to enable remote storage on the server. | | ID | Displays the remote host ID. | | Server | Displays the IP address of the syslog server. | | Port | Displays the port on the syslog server. | | Level | Displays the minimum severity level for logging. | | Facility | Displays the facility identifier that the FortiMail unit uses to identify itself. | 2. Select **Enabled** to allow logging to a remote host, then, in **Profile name**, enter a profile name. 3. In **IP**, enter the IP address of the syslog server where FortiMail stores the logs. 4. In **Port**, enter 514 for syslog (default is UDP). 5. In **Level**, select the severity level that a log message must equal or exceed to be recorded to this location. 6. In **Facility**, select the facility identifier that the FortiMail unit uses to identify itself when sending log messages. 7. To easily identify log messages from the FortiMail unit, enter a unique facility identifier, then verify that no other network devices use the same facility identifier. 8. Deselect **CSV format**. 9. In **Logging Policy Configuration**, enable the types of logs that you want to record to this storage location, then click **Create**. :