--- title: "Configure location awareness options" slug: "configure-location-awareness-options-4" tags: ["Product Usage", "Endpoint Security (ENS)", "ENS 10.7.x"] updated: 2026-10-07T17:45:09Z published: 2026-10-07T17:45:09Z canonical: "docs.trellix.com/configure-location-awareness-options-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure location awareness options A location awareness policy enables administrators to enforce rules based on the network to which the Mac is connected. A location awareness policy contains a set of defined rules. When a network packet matches certain criteria with the group definitions, such as **ePO reachability** or **DNS server** address, the group becomes active. When the location awareness group is active, the rules in the group are also considered for matching. 1. Log on to the ePO - On-prem server as an administrator. 2. From the **Policy Catalog**, select **Endpoint Security Firewall** as the product, then select **Rules** as the category. 3. Click the policy that you want to configure location awareness settings. . > [!NOTE] > Note > > To create a new policy, click **New Policy**, type a name for the policy, then click **OK** to open the policy page. 4. Click **Add Group** to add a group. 5. Type a name for the **Group**, select **Enable group**, then select **Direction** options. 6. Select **Enable Location Awareness**. 7. On the **Location** section, define these parameters, then click **Next**. - **Name** — Type a name for the policy. - **Require that ePolicy Orchestrator be reachable** — Enable the group to match only if there is communication with the Trellix ePO - On-prem server and the FQDN of the server is resolved. - **Location criteria** - **Connection-specific DNS suffix** — Specify a connection-specific DNS suffix in the format: `domain.com`. - **Default gateway** — Specify a single IP address for a default gateway in IPv4or IPv6 format. - **DHCP server** — Specify a single IP address for a DHCP server in IPv4 or IPv6 format. - **DNS server** — Specify a single IP address for a domain name server in IPv4 or IPv6 format. - **Primary WINS** — Specify a single IP address for a primary WINS server in IPv4 or IPv6 format. - **Secondary WINS** — Specify a single IP address for a secondary WINS server in IPv4 or IPv6 format. - **Domain reachability (HTTPS)** — Specify a domain name. You can use the **Add from Catalog** option to add settings from the catalog.