--- title: "Configure predefined scans that can be run manually or scheduled on a client system" slug: "configure-predefined-scans-run-manually-scheduled-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-08-28T20:18:02Z published: 2026-09-14T20:28:37Z canonical: "docs.trellix.com/configure-predefined-scans-run-manually-scheduled-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure predefined scans that can be run manually or scheduled on a client system You can configure the behavior of three predefined on-demand scans: Quick Scan, Full Scan, and Right-Click Scan. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. > [!TIP] > Tip > > **Best practice:** For best practices for configuring on-demand scans, see [KB74059](https://thrive.trellix.com/s/article/KB74059). **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Threat Prevention** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-22T23%3A25%3A28Z&se=2026-11-23T00%3A25%3A28Z&sr=c&sp=r&sig=qS29eVqIaCbsICeMivZ38ibjwDTeStae2aIZKVm4RfA%3D), select **Settings**, then click **Threat Prevention** on the **Settings** page. 3. Click **Show Advanced**. 4. Click **On-Demand Scan**. 5. Click a tab to configure settings for the specified scan. - **Quick Scan** - **Full Scan** - **Right-Click Scan** 6. Configure settings on the page, then click **Apply**.