--- title: "Configure Riverbed Steelhead using the command line" slug: "configure-riverbed-steelhead-using-the-command-line" tags: ["ESM", "Reference"] updated: 2026-10-27T15:51:18Z published: 2026-10-27T15:51:18Z canonical: "docs.trellix.com/configure-riverbed-steelhead-using-the-command-line" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Riverbed Steelhead using the command line This documentation assumes that you are already logged on to the command line interface (CLI) with administrative privileges. See the product documentation from Riverbed Steelhead for more information about how to access and use the command line interface. 1. Set up remote logging. ``` logging ``` Replace `<ip-address>` with the IP address of the Trellix Event Receiver. 2. (Optional) Set the minimum severity of the events being sent. ``` logging trap ``` Where `<ip-address>` is the IP address of the Trellix Event Receiver, and `<log level>` is one of these settings: | Setting | Definition | | --- | --- | | emerg | Emergency | | alert | Alert | | critical | Critical | | err | Error | | warning | Warning | | notice | Notice (default) | | info | Informational | :