--- title: "Configure scans that run automatically when files are accessed on a client system" slug: "configure-scans-run-automatically-files-accessed-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-08-28T20:18:01Z published: 2026-09-14T20:28:37Z canonical: "docs.trellix.com/configure-scans-run-automatically-files-accessed-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure scans that run automatically when files are accessed on a client system On-access scan configuration includes settings based on process type, and defining messages to send when a threat is detected. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Threat Prevention** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-21T07%3A23%3A47Z&se=2026-11-21T08%3A23%3A47Z&sr=c&sp=r&sig=AS17xEWL33ZUOtZMNjZxRNE54x0e8%2F0FsYMn9sWhOiM%3D), select **Settings**, then click **Threat Prevention** on the **Settings** page. 3. Click **Show Advanced**. 4. Click **On-Access Scan**. 5. Select **Enable On-Access Scan** to enable the on-access scanner and change options. 6. Specify whether to use Standard settings for all processes, or different settings for high-risk and low-risk processes. - **Use Standard settings for all processes** — Configure the scan settings on the **Standard** tab. - **Configure different settings for High Risk and Low Risk processes** — Select the tab (**Standard**, **High Risk**, or **Low Risk**) and configure the scan settings for each process type. 7. Click **Apply**.