--- title: "Configure, schedule, and run scans on a client system" slug: "configure-schedule-and-run-scans-on-a-client-system-1" tags: ["Product Usage", "ENS 26.x", "Endpoint Security"] updated: 2026-09-14T19:35:03Z published: 2026-09-14T19:35:03Z canonical: "docs.trellix.com/configure-schedule-and-run-scans-on-a-client-system-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure, schedule, and run scans on a client system Schedule the default full and quick scans or create and schedule custom scans from the Trellix Endpoint Security (ENS) Client in the Common **Options** **Tasks** settings. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. From the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f(1).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A41%3A09Z&se=2026-11-22T16%3A41%3A09Z&sr=c&sp=r&sig=aGhx0BzIETbymy2KaVF3HqONhyS3XCpi74khCTsNtBY%3D), select **Settings**. 3. Click **Show Advanced**. 4. From **Common**, click **Tasks**. 5. Configure settings on the page. | To... | Follow these steps | | --- | --- | | Create a custom scan. | 1. Click **Add**. 2. Enter the name, select **Custom scan** from the drop-down list, then click **Next**. 3. Configure the scan settings and schedule, then click **OK** to save the scan. | | Change the settings for a scan. | - Double-click the scan, make your changes, then click **OK** to save the scan. To change settings for quick and full scans, navigate to Threat Prevention settings, **On-Demand Scan** → **Advanced**, then click the appropriate tab. | | Change the schedule for a quick or full scan. | 1. Double-click **Quick Scan** or **Full Scan**. 2. Click the **Schedule** tab, change the schedule, then click **OK** to save the settings. By default, the **Quick Scan** is enabled and scheduled to run every day at 7 p.m. By default, the **Full Scan** is enabled and scheduled to run every Wednesday at 12 midnight. | | Remove a custom scan. | - Select the scan, then click **Delete**. | | Create a copy of a scan. | 1. Select the scan, then click **Duplicate**. 2. Enter the name, configure the settings, then click **OK** to save the scan. | | Run a scan. | - Select the task, then click **Run Now**. If the task is already running, including paused or deferred, the button changes to **View**. |