--- title: "Configure Symantec Messaging Gateway" slug: "configure-symantec-messaging-gateway" tags: ["ESM", "Reference"] updated: 2026-10-27T15:51:18Z published: 2026-10-27T15:51:18Z canonical: "docs.trellix.com/configure-symantec-messaging-gateway" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Symantec Messaging Gateway 1. Log on to the Symantec Message Gateway Control Center as administrator. 2. Navigate to **Administration** | **Settings** | **Logs**, then select the **Remote** tab. 3. Select **Enable Syslogs for the following host**, then select the host to send syslog data from. 4. In the **Host** field, enter the IP address of the Trellix Event Receiver. 5. Enter the port where the Trellix Event Receiver is listening (default is **514**). 6. Set the **Protocol** field to **UDP**. 7. Set the **Component Remote Log Levels** to the level you want. 8. Select **Enable Message Logs** so that message logs are sent to the Trellix Event Receiver. 9. Set the **Message log facility** to the level you want. 10. Save changes. :