From the Grid perspective, click + (for grid) -> + (for Members) -> members -> Edit -> Member Properties.
In the Grid Member editor, click Monitoring, then define these options.
Override grid syslog settings: Select to override grid-level syslog settings and apply member-level settings.
Enable external syslog server: Select to enable the Infoblox device to send messages to a specified syslog server.
Syslog Server Group: To define one or more syslog servers, click Add, enter the following, and then click OK:
Server Address: Type the IP address of a syslog server.
Connection Type: Specify whether the device uses TCP or UDP to connect to the external syslog-server.
Port: Specify the destination port number.
Out Interface: Specify the interface where the device sends syslog messages to the syslog server.
Severity Filter: Choose a filter from the drop-down list.
Message Source: Specify which syslog messages the device sends to the external syslog server:
Internal: The device sends the syslog messages that it generates.
External: The device sends the syslog messages that it receives from other devices.
Any: The device sends both internal and external syslog messages.
Enable syslog proxy: Select to enable the device to receive syslog messages from other devices, such as syslog servers and routers, then forward these messages to an external syslog server.
Enable listening on TCP: Select if the device uses TCP to receive messages from other devices.
Port: Enter the port number where the device receives syslog messages from other devices.
Proxy Client Access Control: Click Add, enter the following in the Access Control Item dialog box, then click OK:
IP Address option: Select IP Address to add the IP address of a device, or select Network to add the network address of a group of devices.
Address: Enter the IP address of the device or network.
Subnet Mask: If you entered a network IP address, you must also enter its subnet mask.
Click the Save icon to save your settings.
Configure Syslog for a grid member
- Published on Oct 27, 2026
- 2 minute(s) read
Was this article helpful?