--- title: "Configure temporary access to the client interface" slug: "configure-temporary-access-to-the-client-interface" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-09-14T20:39:03Z published: 2026-09-14T20:39:03Z canonical: "docs.trellix.com/configure-temporary-access-to-the-client-interface" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure temporary access to the client interface You can give temporary Administrator access to the client interface by generating a time-based password. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Standard access** or **Lock client interface**. > [!TIP] > Tip > > **Best practice:** During a security incident, disable the time-based password. After a security incident, change the Administrator password and regenerate the time-based password. Changing the Administrator password invalidates the time-based password. If you change the Administrator password, save the policy, then generate a new time-based password. If you enable a time-based password after a connectivity failure, then the Trellix Endpoint Security (ENS) Client will not accept the password. **Task** 1. Select **Menu** → **Policy** → **Policy Catalog**, then select **Endpoint Security Common** from the **Products** list in the left pane. 2. From the **Category** list in the right pane, select **Options**. 3. Click the **Edit** link for an editable policy. 4. Click **Show Advanced**. 5. In the **Time-Based Administrator Password** section, select **Enable time-based password in client interface** and specify an expiration date and time. The maximum expiration time is 14 days. The expiration time is relative to the Trellix ePO - On-prem server. For example, if you set the expiration time to 1:00 p.m. PST, the password expires at 4:00 p.m. on client systems in the EST time zone. 6. Click **Generate New Password**. Two passwords are generated, one for Endpoint Security 10.5 and one for Endpoint Security 10.6 and later. 7. Write down the auto-generated password and provide it to users to allow temporary access. 8. Click **Save**.