--- title: "Configure Threat Prevention with no connection to Trellix GTI on a client system" slug: "configure-threat-prevention-with-no-connection-to-trellix-gti-on-a-client-system-1" tags: ["ENS 26.x", "Product Usage", "Endpoint Security"] updated: 2026-09-14T19:35:08Z published: 2026-09-14T19:35:08Z canonical: "docs.trellix.com/configure-threat-prevention-with-no-connection-to-trellix-gti-on-a-client-system-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Threat Prevention with no connection to Trellix GTI on a client system For systems with no network connection to Adaptive Threat Protection, such as air-gapped systems, you can improve performance by manually disabling Adaptive Threat Protection. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. > [!NOTE] > Note > > Policy changes from ePO - On-prem overwrite changes from the Settings page. Disable Adaptive Threat Protection to eliminate unnecessary attempts to connect to Adaptive Threat Protection when no network path exists and reduce the impact on Trellix ENS performance. > [!WARNING] > Caution > > Disabling Adaptive Threat Protection might result in increased false positives. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Threat Prevention** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f(1).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A58%3A58Z&se=2026-11-22T16%3A58%3A58Z&sr=c&sp=r&sig=IVwZWZruoyHBVZpZ8ISQxE0%2BKYRqV01Xi3XX1eHDxt4%3D), select **Settings**, then click **Threat Prevention** on the **Settings** page. 3. In the **On-Access Scan**, **Trellix GTI** section, deselect **Enable** **Trellix GTI**. 4. Click **Show Advanced**. 5. Click **Apply**.