--- title: "Configure Trellix-defined containment rules on a client system" slug: "configure-trellix-defined-containment-rules-on-a-client-system" tags: ["Product Usage", "ENS 10.7.x", "Endpoint Security"] updated: 2026-09-14T20:39:03Z published: 2026-09-14T20:39:03Z canonical: "docs.trellix.com/configure-trellix-defined-containment-rules-on-a-client-system" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Trellix-defined containment rules on a client system Trellix-defined *containment rules* block or log actions that contained applications perform. You can change the block and report settings, but you can't otherwise change or delete these rules. **Before you begin** Make sure that the interface mode for the Trellix Endpoint Security (ENS) Client is set to **Full access** or log on to the Trellix Endpoint Security (ENS) Client as administrator. **Task** 1. Open the Trellix Endpoint Security (ENS) Client. 2. Click **Adaptive Threat Protection** on the main **Status** page. Or, from the **Action** menu ![GUID-A3B12F55-7EE9-4519-8FCA-9ACA85C3661F-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0f78ce9c-1780-e839-f441-63cdc763a20f.png?sv=2026-02-06&spr=https&st=2026-11-22T20%3A13%3A14Z&se=2026-11-22T21%3A13%3A14Z&sr=c&sp=r&sig=Yi7xmyfSWUdeqos4DDqylWQOSQQEQ79lr8KCA6CEO9c%3D), select **Settings**, then click **Adaptive Threat Protection** on the **Settings** page. 3. Click **Show Advanced**. 4. Click **Dynamic Application Containment**. 5. In the **Containment Rules** section, select **Block**, **Report**, or both for the rule. - To block or report all, select **Block** or **Report** in the first row. - To disable the rule, deselect both **Block** and **Report**. 6. In the **Exclusions** section, configure executables to exclude from Dynamic Application Containment. Processes in the **Exclusions** list run normally (not contained). 7. Click **Apply**.