--- title: "Configure Trellix ESM s" slug: "configure-trellix-esm-s" tags: ["ESM", "Install and Get Started"] updated: 2026-09-12T21:29:45Z published: 2026-09-12T21:29:45Z canonical: "docs.trellix.com/configure-trellix-esm-s" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Trellix ESM s Log on to a new Trellix ESM for the first time. - Verify whether you are required to operate the system in FIPS mode. - Clear your browser cache to prevent logon issues. 1. Open the command prompt for Trellix ESM 11.6.x. 2. At the login prompt, enter `root`. 3. Enter **Password** as `w3e4r5t6`. 4. > ### Note > > Disabling the DHCP setting on an AWS or Azure VM deployment is not supported. Request a static DHCP address, if a permanent IP address is needed. Select **Manage IP Configuration** from the list of commands and then select: | Options | Parameters | Descriptions | | --- | --- | --- | | 1 | Mgt1 | Configure the following: 1. IP address 2. Netmask 3. Gateway IP 4. DNS1 IP 5. DNS2 IP | | 2 | Ssh Port | Enter the Ssh port. | | 3 | Save Changes | Save the changes. | 5. Open a web browser and go to the IP address you set when you configured the network interface. 6. Select the language for the console, then enter the default user name (`NGCP` ) and password (`security.4u`). 7. Click **Log on**. 8. **Accept** the license agreement. 9. When prompted, change your password then click **Save**. ![GUID-C3C25D86-34AB-4025-9EB3-320A78B294E2-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a3d658b5-92a6-21ae-18f8-728b370b1a18(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A36Z&se=2026-11-22T15%3A40%3A36Z&sr=c&sp=r&sig=M6oSuhNCjn4Xp89ELLUvcH10Zd9%2B9JGq7r5fxNCp2LY%3D) 10. Select whether to enable FIPS mode and, if you click **Yes**, enter the additional confirmation. > ### Important > > If you must work in FIPS mode, enable it the first time you log on so that all future communication with Trellix devices is in FIPS mode. Do not enable FIPS mode if you are not required to. 11. Read the Rules Update Access information and click **Ok**. The Write Settings progress monitor appears. The process might take several minutes. 12. When the settings have been written, click **Ok**. 13. (FIPS mode only) Enter your password when prompted. The Initial ESM Configuration wizard appears. | ![GUID-B0A7B954-C137-4CFD-8776-D51F3B3F3C18-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e43a7a19-845f-2102-aa8a-67580e0b7dd6(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A40%3A36Z&se=2026-11-22T15%3A40%3A36Z&sr=c&sp=r&sig=M6oSuhNCjn4Xp89ELLUvcH10Zd9%2B9JGq7r5fxNCp2LY%3D) | | --- | 14. Set the language, time zone, and date format, then click **Save**. 15. Click **Finish**. The normalized dashboard opens. :