--- title: "Configure VLANs and aliases" slug: "configure-vlans-and-aliases" tags: ["ESM", "Product Usage"] updated: 2026-09-12T21:19:29Z published: 2026-09-12T21:19:29Z canonical: "docs.trellix.com/configure-vlans-and-aliases" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure VLANs and aliases Add Virtual Local Area Networks (VLANs) and aliases to a Trellix ESM - ACE or Trellix Enterprise Security Manager - Enterprise Log Manager. Aliases are assigned IP address and netmask pairs that you add if you have a network device with more than one IP address. 1. On the system navigation tree, select a device, click the **Properties** icon ![GUID-F191D568-8B93-4D2C-9BFC-F1342FC407BD-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bb4d6f9c-e211-da56-47b1-210d2bde160b(1).png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A58%3A38Z&se=2026-11-22T15%3A58%3A38Z&sr=c&sp=r&sig=9dz4oiLvWcdU080BedeseJb4IEO6rOjQaDJoAhe%2BTak%3D), then click device **Configuration**. 2. In the **Interfaces** section of the **Network** tab, click **Setup**, then click **Advanced**. 3. Click **Add VLAN**, enter the information requested, then click **OK**. - Identify the VLAN number in the system. - Enable DHCP services for non-cloud environments. DHCP is useful if you need to reset the IP addresses for your network. > ### Caution > > If you are using a redundant Trellix Enterprise Security Manager - Enterprise Log Manager, redundancy stops working if the IP address of the redundant device is changed. - IPv4 is selected by default. If you have IPv6, set Network Settings to **Manual** or **Auto**. The **IPv6** option is enabled. - Identify the VLAN IP address. - Identify the **IPv4** netmask (disabled if the IP address is in IPv6 format). 4. Select the VLAN where you want to add the alias, then click **Add Alias**. - Identify the VLAN this alias is on. > ### Note > > The system prepopulates VLAN with the number of the VLAN this alias is being added to. If it is the **Untagged** VLAN, this number is 0. - Indicate whether the IP address is an IPv4 or IPv6 format. - Indicate the netmask (if the address is in IPv4 format). 5. Click **OK**.