--- title: "Configuring Case sensitivity on ePO Managed Solidcore Client" slug: "configuring-case-sensitivity-on-epo-managed-solidcore-client-1" tags: ["Product Usage", "ACC 8.4.x"] updated: 2026-09-01T13:05:00Z published: 2026-09-01T13:05:00Z canonical: "docs.trellix.com/configuring-case-sensitivity-on-epo-managed-solidcore-client-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Case sensitivity on ePO Managed Solidcore Client Trellix Application and Change Control supports case sensitivity. You can solidify and un-solidify files having the same name but with different case. > [!NOTE] > Note > > Case sensitivity is disabled by default on all supported operating system versions, including Windows 10 and Windows 11. The configuration value 0 disables case sensitivity. The configuration value 1 enables case sensitivity. 1. Follow these steps to enable case sensitivity on Windows 10 and Windows 11: 1. Disable **Solidcore** and reboot systems if **Solidcore** is in **Enable** mode. 2. In ePO - On-prem, go to **Client Task catalog**. Navigate to Solidcore 8.4.x (or later), and click **New Task** and select **SC:Run Commands**. 3. Enter a **Task name**. 4. In the run configuration, set: `InventoryCaseSensitivityEnabled=1` For information about "InventoryCaseSensitivityEnabled" values, see [KB96798](https://thrive.trellix.com/s/article/KB96798). 5. Add `Sadmin` clean command `(clean C:\)`. 6. Send a task to resolidify the system and `Enable`. 2. Follow these steps to disable case sensitivity on Windows 10 and Windows 11: 1. Disable **Solidcore** and reboot systems if **Solidcore** is in **Enable** mode. 2. In ePO - On-prem, go to **Client Task catalog**. Navigate to Solidcore 8.4.x (or later), and click **New Task** and select **SC:Run Commands**. 3. Enter a **Task name**. 4. In the run configuration, set the value based on your version. - For version 8.4.4 or earlier: Windows 10: `InventoryCaseSensitivityEnabled=0` Windows 11: `InventoryCaseSensitivityEnabled=2` - For version 8.4.5 or later: Windows 10: `InventoryCaseSensitivityEnabled=0` Windows 11: `InventoryCaseSensitivityEnabled=0` 5. Add `Sadmin` clean command `(clean C:\)`. 6. Send a task to resolidify the system and `Enable`.