--- title: "Configuring Case sensitivity on ePO Managed Solidcore Client" slug: "configuring-case-sensitivity-on-epo-managed-solidcore-client" tags: ["Product Usage", "ACC 8.3.x"] updated: 2026-09-09T18:02:39Z published: 2026-09-09T18:02:39Z canonical: "docs.trellix.com/configuring-case-sensitivity-on-epo-managed-solidcore-client" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring Case sensitivity on ePO Managed Solidcore Client Trellix Application and Change Control supports case sensitivity. You can solidify and un-solidify files having the same name but with different case. > [!NOTE] > Note > > Case sensitivity support is disabled by default on Windows 10 or below. When Trellix Application and Change Control is getting installed on Window 11, case sensitivity turns on by default. 1. Follow these steps to enable case sensitivity on Windows 10: 1. Disable **Solidcore** and reboot systems if **Solidcore** is in **Enable** mode. 2. In ePO - On-prem, go to **Client Task catalog** . Navigate to Solidcore 8.3.x, and click **New Task** and select **SC:Run Commands**. 3. Enter **Task name** and in run config set: `InventoryCaseSensitivityEnabled=1` 4. Add `Sadmin` clean command `(clean C:\)`. 5. Send a task to resolidify the system and `Enable`. 2. Follow these steps to disable case sensitivity on Windows 10 and Windows 11: 1. Disable **Solidcore** and reboot systems if **Solidcore** is in **Enable** mode. 2. In ePO - On-prem, go to **Client Task catalog** . Navigate to Solidcore 8.3.x, and click **New Task** and select **SC:Run Commands**. 3. Enter **Task name** and in run config set: `InventoryCaseSensitivityEnabled=0` for Windows 10 and `InventoryCaseSensitivityEnabled=2` for Windows 11. 4. Add `Sadmin` clean command `(clean C:\)`. 5. Send a task to resolidify the system and `Enable`.