--- title: "Configuring event notifications using the CLI" slug: "configuring-event-notifications-using-the-cli" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:18:06Z published: 2026-09-23T17:25:27Z canonical: "docs.trellix.com/configuring-event-notifications-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring event notifications using the CLI Prerequisites - The appliance must have an established connection to the Internet. - Operator or Admin access. ### Configuring event notifications Use the CLI commands in this topic to configure event notifications. To configure event notifications using the CLI: ``` hostname > enable ``` ``` hostname # configure terminal ``` 1. Go to CLI configuration mode. 2. Check which protocols are already enabled: `hostname (config) # show fenotify email hostname (config) # show fenotify http` 3. Configure the protocols that you want to use: - [Configuring email notifications using the CLI](/docs/configuring-email-notifications-using-the-cli) - [Configuring HTTP notifications using the CLI](/docs/configuring-http-notifications-using-the-cli) 4. Confirm that the protocols are configured correctly: `hostname (config) # show fenotify email` `hostname (config) # show fenotify http` 5. Enable the notifications. By default, notifications are enabled. This command only affects notifications for enabled protocols. If a protocol has been disabled, you must enable the protocol before enabling notifications. `hostname (config) # fenotify enable` 6. Select the event type: `hostname (config) # fenotify alert indicator-presence` `hostname (config) # fenotify alert indicator-executed` `hostname (config) # fenotify alert exploit-detected` `hostname (config) # fenotify alert exploit-blocked` 7. Save the configuration: `hostname (config) # write memory` :