--- title: "Configuring HTTP settings" slug: "configuring-http-settings-1" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:25:03Z published: 2026-09-23T17:25:03Z canonical: "docs.trellix.com/configuring-http-settings-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring HTTP settings Use the CLI commands in this topic to set up the default configuration for HTTP notifications. To configure HTTP settings: 1. Go to CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. Enable HTTP notifications: `hostname (config) # fenotify http enable` 3. Specify the default delivery frequency to receive information about each event, sent when the event is triggered. Enter: `hostname (config) # fenotify http default delivery per-event` 4. Specify the default service provider. The default service provider is `generic`. ### Note Trellix recommends using the `generic` service provider. Endpoint SecurityEndpoint Security (HX) servers do not support Aruba. - To select Aruba as the provider, enter: `hostname (config) # fenotify http default provider aruba` - To select the generic provider, enter: `hostname (config) # fenotify http default provider generic` 5. Specify the default format of the notifications as JSON Normal format. To post notifications in JSON Normal format containing detailed information and abstracts such as alert type, ID, source IP, malware name, hostname, and alert URL without any redundant information, enter: `hostname (config) # fenotify http service <service_name> provider generic message format json-normal` 6. Save the configuration: `hostname (config) # write memory` :