--- title: "Configuring initial settings using the serial console port" slug: "configuring-initial-settings-using-the-serial-console-port" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T17:54:23Z published: 2026-09-10T21:18:44Z canonical: "docs.trellix.com/configuring-initial-settings-using-the-serial-console-port" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring initial settings using the serial console port If you are not using a terminal server, you need to be physically near the Endpoint Security (HX) appliance to use the serial port. The serial port is on the back of the appliance. See your *Hardware Administration Guide* to view the port location. The serial port uses the following settings: - Baud rate: 115200 - Data bits: 8 - Stop bits: 1 - Parity: None - Flow control: XON/XOFF Configure initial settings as described in the following topics: - [Using a Windows or Mac Laptop](/docs/using-a-windows-or-mac-laptop) - [Using a Linux System](/docs/using-a-linux-system) - [Using a Terminal Server](/docs/using-a-terminal-server) :