--- title: "Configuring NTP servers using the Web UI" slug: "configuring-ntp-servers-using-the-web-ui" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-23T17:25:03Z published: 2026-09-23T17:25:03Z canonical: "docs.trellix.com/configuring-ntp-servers-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring NTP servers using the Web UI Use the **Enable NTP** section of the **Date and Time Settings** page to configure NTP servers. ### Note The Intelligent Virtual Execution - Server appliance has a CLI and a Web UI. The recommended method for this configuration on a Intelligent Virtual Execution - Server appliance is through the Central Management System Web UI. ![All_Settings_DateNTP_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7c3a854f-7bce-7056-39f9-51d743a8d1d7(11).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A35%3A48Z&se=2026-11-20T07%3A35%3A48Z&sr=c&sp=r&sig=LyjBR4SCDq5gLmUDouhhsNwbPLu%2Fo1cz86eE1sjxuik%3D)To configure NTP servers: 1. Select **Appliance Settings** from the **Admin** menu. 2. Click **Date and Time** on the sidebar. 3. Click **Add NTP Server**. 4. Enter the IP address or hostname of the NTP server that you want to use in the **Add NTP Server** box. 5. Click **Add**. 6. Repeat the previous three steps to add additional servers. 7. To synchronize the system time once with a selected NTP server, click **Update** next to the server entry. The time is updated, and the needed adjustment is displayed in a message on the page. 8. To delete an NTP server, select the checkbox next to the server and then click **Remove NTP Server**. 9. Click **Yes** to confirm the action. :