--- title: "Configuring the system information task-timeout period" slug: "configuring-the-system-information-task-timeout-period-1" updated: 2026-09-08T19:06:27Z published: 2026-09-08T19:06:27Z canonical: "docs.trellix.com/configuring-the-system-information-task-timeout-period-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuring the system information task-timeout period To configure the system information request timeout period using the CLI: 1. Enable the CLI configuration mode: `hostname > enable ` ``` hostname (config) # configure terminal ``` 2. Enter the number of seconds for the new system information request timeout period. Valid values range from 0 to 31536000 seconds (1 year). The default timeout period is 43200 seconds (12 hours). `hostname (config) # hx server sysinfo task-timeout <seconds>` To restore the default system information timeout period of 43200 seconds (12 hours): `hostname (config) # no hx server sysinfo task-timeout <seconds>` 3. Verify updated sysinfo settings: `hostname (config) # show hx server general` 4. Save your settings: `hostname (config) # write mem` :