--- title: "Containment Settings page" slug: "containment-settings-page" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T15:35:26Z published: 2026-09-10T15:35:26Z canonical: "docs.trellix.com/containment-settings-page" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Containment Settings page Use the Containment Settings page to control the Endpoint Security (HX) containment feature: - Turn the containment feature on or off. - Identify host sets that should be excluded from containment. - Create a whitelist of IP addresses with which contained host endpoints can still communicate. ### Important Whitelisting only works when there is a direct connection between your host endpoint and a connected system. If your contained host is connected to other systems through the proxy server, you cannot whitelist the contained host IP address. - Turn the containment unlock code feature on or off. ### Important The containment unlock code is supported for Windows agents version 28 or later only. It is not supported for endpoints running Windows XP. The containment unlock code is supported for macOS agents version 30 or later only. - Set up automatic notification of a host endpoint's containment using either a direct message or a Web page redirect. See [Configuring containment](/docs/configuring-containment-2) for complete information. ![HX_ContainmentSettings.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-766da438-389d-6a4c-b257-1e31c6271f46(1).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A06%3A31Z&se=2026-11-20T14%3A06%3A31Z&sr=c&sp=r&sig=BdiFcEBNL%2FuETopIXYEt9ahJ3N%2BQVNWAB51lZumSZys%3D) To access the Containment Settings page, select **Containment Settings** on the **Configure** menu. Prerequisites - Admin access ### Containment switch Use the **Containment** switch at the top of the page to turn the ability to contain hosts on and off. ### Note You cannot turn containment on or off when containment is disabled (DISABLED appears in the Endpoint Security (HX) Web UI). You must first enable containment using the CLI. See [Blocking and unblocking access to containment](/docs/blocking-and-unblocking-access-to-containment-2) and [Turning containment On and Off](/docs/turning-containment-on-and-off-2). ### Exclude Hosts list The Exclude Hosts list shows the host sets currently defined on your appliance. Select a host set to exclude it from containment. See [Excluding Host Sets from Containment](/docs/excluding-host-sets-from-containment-2) for more information. ### Allowed IP Addresses list The Allowed IP Addresses list shows the IP addresses with which contained hosts can communicate. You can add or remove IP addresses from this list. See [Maintaining the Contained Host Whitelist](/docs/maintaining-the-contained-host-allow-list-2) for more information. ### Unlock Code switch Use the containment **Unlock Code** switch to turn on and off the ability to request an unlock code from the Endpoint Security (HX) Web UI to remove a host endpoint from containment. ### End-User Notification pane Use the **End-User Notification** switch at the top of the page to turn automatic notification of containment on and off. You can specify a URL to which hosts are redirected when they are contained or specify a direct message that will be sent to hosts when they are contained. See [Notifying end users about host containment](/docs/notifying-end-users-about-host-containment-2) for more information. :