--- title: "Converting an on-premises HXD appliance into a TCP relay" slug: "converting-an-on-premises-hxd-appliance-into-a-tcp-relay-2" tags: ["HX 10.x", "Endpoint Security (HX)", "Product Usage"] updated: 2026-09-10T17:52:14Z published: 2026-09-10T17:52:14Z canonical: "docs.trellix.com/converting-an-on-premises-hxd-appliance-into-a-tcp-relay-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Converting an on-premises HXD appliance into a TCP relay To convert an on-premises HXD appliance into a TCP relay for the on-premises HX appliance using the CLI: 1. Log in to the on-premises HXD appliance using the SSH protocol and the IP address or host name of the appliance's management interface. 2. Enable CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 3. Convert the on-premises HXD appliance into a TCP relay to the on-premises HX appliance: ``` hostname # hx rproxy relay ``` where `<ip address>` is the public IP address of the on-premises HX appliance. 4. Save your changes: ``` hostname (config) # write memory ``` ### Note If the HXD appliance is in relay mode when it is upgraded, relay mode must be reenabled after the upgrade completes. :