--- title: "Create a virtual Trellix SIEM device on an Azure VM" slug: "create-a-virtual-trellix-siem-device-on-an-azure-vm-1" tags: ["ESM"] updated: 2026-09-12T21:25:04Z published: 2026-09-12T21:25:04Z canonical: "docs.trellix.com/create-a-virtual-trellix-siem-device-on-an-azure-vm-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Create a virtual Trellix SIEM device on an Azure VM Deploy a Trellix SIEM device image on an Azure VM. - Run the installer script for the device you want to create. - Consult with your Trellix ESM specialist to determine the optimal size of your VM. These instructions refer to third-party products. You might need to adapt to changes in interfaces or processes. 1. From the Azure **Resource group** page, select the device image. 2. Click **Create VM**. 3. Select a **Resource Group**. 4. Type a **Virtual machine name**. 5. Configure the VM **Size** with sufficient cores and memory to support the device. 6. Set the **Authentication type** to **Password** and set the logon credentials. ### Note These credentials are replaced by the Trellix default credentials when the VM is created. You don't need to remember these credentials. 7. For an Trellix ESM device, set **Public inbound ports** to **Allow selected ports**. For other devices, set it to **None**. 8. Under **Select inbound ports**, select **HTTPS**, **HTTP**, and **SSH**. 9. Click **Next: Disks**. 10. If you want to add a disk, click **Create and attach a new disk**. A Trellix Support specialist can tell you which devices support additional disks. 11. Set the disk **Size** appropriate for your device, and click **OK**. 12. Click the remaining tabs and configure the VM. ### Tip Tags help you keep track of your VMS. For example, you can add tags for owner, environment, or date created. 13. On the **Review + Create** tab, review the information and click **Create**. The virtual server is created and a confirmation is shown. This can take a few minutes. It will be listed in the Virtual machines 14. Select the new VM and copy the IP address. 15. For an Trellix ESM, paste the IP address into a web browser and log on with theTrellix default credentials. 16. For devices other than Trellix ESM, log on to the Trellix ESM and key the device. ### Note Disabling the DHCP setting on an Azure VM deployment is not supported. Request a static DHCP address, if a permanent IP address is needed. (Optional) Disable or delete the temporary Linux VM you used to run the installation script. :